TH3015 transformer partial discharge online monitoring
TH3015 transformer partial discharge online monitoring
Product Description
Scope of Application
Technical Features/Advantages
Comprehensive data analysis
It has the functions of real-time acquisition, storage and analysis of partial discharge data of transformer equipment, and can display the peak value diagram, discharge times-phase diagram, peak value-discharge times-phase spectrum, peak-cycle-phase spectrum of partial discharge in real time, which is convenient for users to carry out real-time analysis of data, and it is simple and intuitive.
Strong anti-interference performance
By using the ultrasonic, ultra-high frequency and high-frequency current electric acoustic partial discharge detection technology, it is not affected by corona interference and can avoid the interference of communication signals.
Interference suppression in hardware circuit
Using multiple anti-interference technologies, current structures such as noise filtering channel and noise acquisition channel are adopted in the hardware design, which are used to filter on-site noise and purify the acquisition signal.
Flexible communication
It supports multiple protocols and the IEC61850 communication, and it can be connected to the digital substation monitoring system.
High reliability
Parameters, such as partial discharge action level and standard density, can be set via software to automatically separate noise interference signals and improve the reliability of detection results.
Friendly system interface
The system is easy to operate, which has the functions of data analysis and diagnosis, analysis and prediction according to historical trends, as well as rich image display functions.
Specifications/Submodels
Ultrasonic sensor |
||
No. |
Parameter |
Scope |
1 |
Ultrasonic frequency range |
20kHz~300 kHz |
2 |
Type of ultrasonic detection channel interface |
Waterproof connector |
3 |
Minimum detection amount of ultrasonic sensor partial discharge |
No less than 20pC |
UHF sensor |
||
No. |
Parameter |
Scope |
1 |
UHF band range |
300MHz-1500MHz |
2 |
UHF sensitivity (equivalent height) |
10mm |
3 |
Input impedance of UHF detection channel |
50Ω |
4 |
Interface type of UHF detection channel |
Waterproof connector |
High-frequency sensor |
||
No. |
Parameter |
Scope |
1 |
Bandwidth of high frequency current sensor |
50kHz~50MHz |
2 |
Interface type of high frequency current detection channel |
Waterproof connector |
Acquisition unit parameters |
||
No. |
Parameter |
Scope |
1 |
Maximum sampling rate of the measurement host |
≥20MS/s |
2 |
Sampling data precision of measurement host |
≥12位 ≥12 bit |
3 |
Synchronization function |
It can obtain the power frequency synchronization signal from the 200VAC electric supply on the power socket, and power synchronization is adopted. |
4 |
Working power supply |
AC220±10%, 50±1Hz |
5 |
Protection level |
IP56, it can be used in the weather conditions of rain and snow. |
Related Solutions