PRS-7961 Switch
Product Description
CYG PRS-7961 Industrial Ethernet Switch, designed for Communications Networking Devices Installed in Electric Power Substations and harsh industrial environment. Widely used in smart grid, new energy, industrial control, transportation, water conservancy and other fields.
Scope of Application
CYG PRS-7961 Industrial Ethernet Switch, designed for Communications Networking Devices Installed in Electric Power Substations and harsh industrial environment. Widely used in smart grid,
Technical Features/Advantages
Adopt 10/100M BASE-TX Ethernet port,100BASE-FX、1000BASE-SX optical port. The optical port type if of LC type.
EC 61850-3 and IEEE 1613 (power substations) compliant.Ensure reliable transmission of information in power system.
19 inch standard rack mounting supported.
-40 to 85°C operating temperature range.
Enclosure protection: IP40 .Natural Cooling Design.
Redundant double power supply, switch between the main and standby power without causing any interruption.
Power supply type and range: 110/220 VDC/VAC,-20%~+20% power deviation.
Built-in MMS server, based on IEC 61850-90-4 switch modeling for power SCADA.
Network management is flexible and compatible with SNMPv1/v2c/v3.
Simply configuration maintenance, support WEB, Console, Telnet.
Supports RSTP and SR-Ring.
SNTP、IEEE 1588v2 PTP TC supported.
Flexible interface configuration, supporting 4 Gigabit interface + 24 fast interface or 24 Gigabit interface.
Specifications/Submodels
Technical parameters |
Standard |
IEEE 802.3i,IEEE 802.3u,IEEE 802.3ab,IEEE 802.3z,IEEE802.3x,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,802.1x |
Protocol |
SR-Ring、VLAN、STP/RSTP、IGMP snooping、GMRP、SSH、HTTP、HTTPS、SNMPv1/v2c/v3、RMON、QoS、Port Aggregation、Port Mirror、802.1X、SNTP Client/Server、RTC、SSL,ACL、FTP、IEEE 1588v2 PTP TC |
|
Switch features |
Priority queues |
4 |
VLAN entries |
512 |
|
VLAN ID |
1~4094 |
|
Multicast entries |
512 |
|
MAC addresses |
8K |
|
Packet buffer and control memory |
4Mbit |
|
Packet forwarding rate |
9.5Mpps |
|
Latency |
<5μs |
|
Interface |
1000M optical interfaces |
1000Base-X SFP |
100M optical interfaces |
100Base-FX SFP |
|
Electrical interfaces |
10/100Base-T(X) self-adaptive RJ45 connector |
|
Console |
RJ45 |
|
Management port |
10/100Base-T(X) self-adaptive RJ45 connector |
|
Alarm terminal |
3-core 5.08mm-spacing pluggable terminal block,250VAC/220VDC Max,2A Max,60W Max |
|
Indicator lights |
Indicator lights of front panel |
Running indicator light :Run |
Alarm indicator light:Alarm |
||
Indicator light of power supply:PWR1,PWR2 |
||
Interface indicator light:Link/ACT,Speed |
||
Indicator lights of back panel |
Interface link state indicator light (green light) :Link/ACT |
|
Interface speed indicator light (yellow light) :Speed |
||
Transmission distance |
Twisted pair |
100m(adopt Cable which satisfy CAT5 or CAT5e) |
Multimode fiber |
1310nm,2km(100M) |
|
850nm,550m(1000M) |
||
Single mode fiber |
1310nm,40km/60km(100M) |
|
1550nm,60km/80km(100M) |
||
1310nm,10km/40km(1000M) |
||
1550nm,60km/80km(1000M) |
||
Power |
Input rated voltage range |
220V AC/DC(85-264V AC/77-300V DC) |
Connecting terminal |
5-core 5.08mm-spacing pluggable terminal block |
|
Rated power |
<35W |
|
Overload protection |
Support |
|
Wrong polarity protection |
Support |
|
Redundancy protection |
Support |
|
Mechanical structure |
Case |
Cooling surface design of aluminum case, without fan |
Ingress protection |
IP40 |
|
Installation method |
19-inch 1U rack mounting |
|
Environment |
Working temperature |
-40℃~+85℃ |
Storage temperature |
-40℃~+85℃ |
|
Relative humidity |
5~95%,without condensation |
|
International standard |
EMI |
FCC CFR47 Part 15,EN55022/CISPR22,Class A |
EMS |
IEC61000-4-2(Electrostatic discharge immunity test) ±8kV(contact),±15kV(air) |
|
IEC61000-4-3(Radiated,radio-frequency electromagnetic field immunity test) 10V/m(80MHz~2GHz) |
||
IEC61000-4-4(Electrical fast transient/burst immunity test) Power Port:±4kV;Data Port:±2kV |
||
IEC61000-4-5(Surge immunity test) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV |
||
IEC61000-4-6(Immunity to conduced disturbances,induced by radio-frequency fields) 3V(10kHz~150kHz);10V(150kHz~80MHz) |
||
IEC61000-4-8(Power frequency magnetic field immunity test) 100A/m(cont.),1000A/m(1s~3s) |
||
IEC61000-4-9(Impulse magnetic field immunity test) 1000A/m |
||
IEC61000-4-10(Damped oscillatory magnetic field immunity test) 100A/m |
||
IEC61000-4-12(Oscillatory waves immunity test) 2.5kV/CM,1kV/DM |
||
IEC61000-4-16(Test for immunity to conducted,common mode disturbances in frequency range 0 Hz to 150 kHz) 30V(cont.),300V(1s) |
||
Mechanics |
IEC60068-2-6(Vibration) IEC60068-2-27(Shock) IEC60068-2-32(Free fall) |
|
Industry |
IEC61000-6-2 |
|
Electricity |
IEC61850-3,IEEE1613 |
Related Solutions